Right Taillight Assembly - 1991 300ZX Z32

The right taillight assembly for the 1991 Nissan 300ZX (Z32) mounts via four Phillips-head fasteners and a locating pin, accessible after removing the trunk side trim panel. When sourcing replacements, verify you have the early-style 1990-1994 design (Nissan part 26550-30P00) rather than the 1994-1996 updated smoked units, as the mounting bracket geometry differs. Inspect donor units for stress cracks in the clear turn signal sections and check that the STANLEY or KOITO casting marks match your application. Both VG30DE and VG30DETT models share identical taillight assemblies, though 2+2 models use different part numbers due to extended quarter panels—confirm your donor car is a 2-seater. Test all bulb socket rotations and inspect the four-pin electrical connector for green oxidation before purchase. During installation, replace the foam trunk seal gasket to prevent moisture intrusion, as these housings are prone to crazing and condensation issues in humid climates.