Front Right Seat Belt Retractor - 1987 Mustang

The 1987 Ford Mustang Fox Body utilizes a B-pillar mounted retractor assembly for the front right (passenger) position, designated under Ford part number E7ZZ-611B08-A. When sourcing from junkyards, target 1987-1993 Coupe and Hatchback models, as 1990-1993 Convertibles switched to integrated seat-mounted belts incompatible with hardtop applications. Inspect retractor action by pulling the webbing fully; it should retract smoothly without slack. Check for corrosion on the mounting bracket, common in snow-belt vehicles. The casting number E7TB-611B08-AA stamped on the aluminum housing confirms correct fitment. Installation requires torquing the three 7/16-inch mounting bolts to 30-40 ft-lbs using a torque wrench—critical for occupant safety during collision events. Common failures include spring fatigue and locked mechanisms due to dirty internal pawls. If the ALR (Automatic Locking Retractor) mode doesn't engage when pulled slowly to full extension, replace the unit. F3ZZ-611B08-A represents the later service supersession, functionally identical but with updated webbing materials.