
Seller: Marketplace seller
$111
Asking
This usually takes 5-15 seconds. We're pulling together fitment data,
OEM numbers, and community knowledge...
Dusting off the service manual...
💡 This page improves over time as the community adds casting photos and confirms fitment
Front Right Door Panel
This usually takes 5-15 seconds. We're pulling together fitment data,
OEM numbers, and community knowledge...
Dusting off the service manual...
💡 This page improves over time as the community adds casting photos and confirms fitment
Wiki page
5.7L V8 Naturally Aspirated LS1 (350hp).
Quick reference
Part numbers listed are derived from training data and should be verified against GM EPC (Electronic Parts Catalog) for specific interior trim color codes
2001 model year may contain carryover 2000-style panels or hybrid mounting hardware - verify all six mounting tabs visually before purchase
Coupe and Convertible door panels are NOT interchangeable due to different door shell geometry and window frame requirements
Context
When junkyard hunting for your Chevrolet C5 Corvette, focus specifically on 2001-2004 model years for the updated interior design. The front right door panel (GM service #10313102 for coupes) differs significantly from 1997-2000 pre-facelift versions and is not interchangeable with convertible variants. Always verify the stamped part number 10253782 on the reverse side matches your specific body style and interior color code. Inspection is critical: check for cracked mounting tabs along the bottom edge, delaminating leather or synthetic suede on the insert panel, and stress cracks around the door pull handle brackets. Test the map pocket retention carefully as sagging fabric is endemic to these units. Installation requires removing the sail panel trim and two hidden Torx screws behind the grab handle escutcheon. Disconnect the negative battery first to avoid airbag deployment when unclipping the side impact sensor wiring harness. Remember that convertible panels feature taller upper sections designed for framed windows and will not align with coupe door shells, while early 2001 production occasionally used carryover 2000-style mounting hardware.
No OEM numbers yet. Add one.
Confirmed fitment
| Year | Make | Model | Engine | Confidence |
|---|---|---|---|---|
| 2002 | Chevrolet | Corvette | 5.7L V8 Naturally Aspirated LS1 (350hp) | 80% |
Available parts

Seller: Marketplace seller
$111
Asking

Contribute
The wiki gets better with every install.
Sign in to contributeZ06 models may have unique trim materials but share the same panel substrate and mounting points
Verify electrical connector compatibility for side-impact airbag sensors and memory seat modules
Seller: Marketplace seller
$111
Asking