Front Right Exterior Door Handle - 1991 300ZX Z32

For the Z32 chassis, Nissan utilized the 80606-30P00 assembly for the front right exterior handle across all VG30DE and VG30DETT variants from 1990-1996. This component interchanges broadly throughout the entire production run, though 1994-1996 keyless-entry-equipped models require verification of the actuator rod clip. When harvesting from salvage yards, inspect the chromed plastic shell for UV degradation—a common failure where the coating peels from the substrate. Verify the white nylon mounting tabs are intact; these brittle with age and crack during removal. The interior rod connection uses a yellow plastic clip (often missing in junkyards) that secures the latch rod to the handle lever. Installation requires removing the door panel and water shield, then unbolting the 10mm fasteners while feeding the 80606-30P01 assembly through the access hole. If your 1991 twin-turbo is equipped with the factory security system, ensure you retrieve the matching lock cylinder or rekey the replacement handle.