
Seller: Marketplace seller
$18
Asking
This usually takes 5-15 seconds. We're pulling together fitment data,
OEM numbers, and community knowledge...
Dusting off the service manual...
💡 This page improves over time as the community adds casting photos and confirms fitment
Alternator Mounting Bracket
This usually takes 5-15 seconds. We're pulling together fitment data,
OEM numbers, and community knowledge...
Dusting off the service manual...
💡 This page improves over time as the community adds casting photos and confirms fitment
Wiki page
5.7L V8 Naturally Aspirated LS1 (350hp).
Quick reference
Verify physical casting number 10260635; printed service numbers may have superseded multiple times since original production
1997-1998 model years utilized distinct water pump impeller clearances; verify bracket does not contact pump housing on early builds
Not interchangeable with any Camaro, Firebird, GTO, or GMT800 truck/SUV LS1/LS6 applications despite identical engines
Context
The Chevrolet C5 Corvette alternator mounting bracket (primary part 10260635) is a platform-specific cast aluminum component that positions the alternator on the passenger side cylinder head, distinct from F-body applications despite sharing the LS1 architecture. When sourcing from salvage yards, prioritize locating the raised casting number 10260635 rather than relying on service part numbers due to GM's extensive supersession history. This component fits all 1997-2004 model years including the high-output Z06, though interchange with Camaro or Firebird is impossible due to Corvette-specific accessory drive geometry. Critical inspection points include the lower mounting ear for fatigue cracks caused by over-tightened alternator bolts, and verification that the M8 adjustment slot threads remain intact. During installation, apply medium-strength thread locker to the three cylinder head bolts and torque to 37 Nm (27 ft-lb); additionally, clean the ground strap connection at the rear mounting point to prevent erratic voltage output. Always replace the complementary adjuster arm (check for casting 12551323) as a pair if either component shows wear.
No OEM numbers yet. Add one.
Confirmed fitment
| Year | Make | Model | Engine | Confidence |
|---|---|---|---|---|
| 2002 | Chevrolet | Corvette | 5.7L V8 Naturally Aspirated LS1 (350hp) | 80% |
Available parts

Seller: Marketplace seller
$18
Asking

Contribute
The wiki gets better with every install.
Sign in to contributeLS6-equipped Z06 models (2001-2004) utilize identical bracket to base LS1; no high-performance variant distinction required
Seller: Marketplace seller
$18
Asking