
Seller: Marketplace seller
$18
Asking
This usually takes 5-15 seconds. We're pulling together fitment data,
OEM numbers, and community knowledge...
Dusting off the service manual...
đź’ˇ This page improves over time as the community adds casting photos and confirms fitment
Fuel Door Release Switch
This usually takes 5-15 seconds. We're pulling together fitment data,
OEM numbers, and community knowledge...
Dusting off the service manual...
đź’ˇ This page improves over time as the community adds casting photos and confirms fitment
Quick reference
Early 1989 production Z32 may use different switch geometry; verify mounting hole spacing before purchase
Interior color codes (black vs gray) vary; part number does not indicate button color
JDM Long Nose (1998-2000) Z32 models may have revised interior trim mounting; verify compatibility
Context
The fuel door release switch on the 1991 Nissan 300ZX (Z32) is a failure-prone interior component located on the driver's kick panel, just left of the hood release lever. The primary Nissan part number 25380-40P00 (superseding earlier 25380-30P01) fits all 1990-1996 Z32 variants regardless of VG30DETT or VG30DE engine configuration. When sourcing from junkyards, prioritize 1990-1996 300ZX donors, though S13 240SX switches share the same internal mechanism requiring bracket modification. Inspection points include: tactile button return (should snap back crisply), intact plastic mounting tabs (common failure point), and corrosion-free terminals. Installation requires removing the lower dash trim panel with a Phillips screwdriver; the switch snaps into the bracket with two locking tabs. Test continuity between pins when pressed—intermittent contact indicates internal wear. For JDM imports, verify the connector matches USDM 2-pin configuration, as some Fairlady Z models used alternate wiring.
No OEM numbers yet. Add one.
Confirmed fitment
| Year | Make | Model | Engine | Confidence |
|---|---|---|---|---|
| 1991 | Nissan | 300ZX | VG30DETT | 80% |
Available parts

Seller: Marketplace seller
$18
Asking

Contribute
The wiki gets better with every install.
Sign in to contributeS13 interchange requires swapping original mounting bracket; switch mechanism only is compatible
Seller: Marketplace seller
$18
Asking

Seller: Marketplace seller
$34
Asking