
Seller: Marketplace seller
$59
Asking
This usually takes 5-15 seconds. We're pulling together fitment data,
OEM numbers, and community knowledge...
Dusting off the service manual...
💡 This page improves over time as the community adds casting photos and confirms fitment
Front Right Brake Rotor
This usually takes 5-15 seconds. We're pulling together fitment data,
OEM numbers, and community knowledge...
Dusting off the service manual...
💡 This page improves over time as the community adds casting photos and confirms fitment
Quick reference
Verify TT vs NA distinction visually by checking for aluminum 4-piston Sumitomo calipers; NA models use iron 2-piston units with incompatible bracket spacing
JDM Fairlady Z rotors are dimensionally identical but may carry different corrosion protection specifications for domestic market
Some aftermarket performance rotors are directional (vaned); OEM Nissan 40206-30P00 is non-directional and fits either side
Context
For the 1991 Nissan 300ZX Twin Turbo (Z32), the front right brake rotor is a critical 280mm ventilated disc distinct from the smaller NA variant. Genuine Nissan units carry OEM number 40206-30P01 (right hand) or the interchangeable 40206-30P00, with casting mark '30P00' stamped on the hat. When junkyard hunting, restrict searches to 1990-1996 VG30DETT models exclusively; the naturally aspirated VG30DE employs smaller 260mm rotors with iron 2-piston calipers that will not mount. Inspect carefully for radial heat cracks, measure remaining thickness against the 28.0mm minimum specification, and verify the cooling vanes are not clogged. During installation, torque wheel lugs to 87-116 ft-lbs in a star pattern to prevent warping these 30mm thick castings, and always resurface or replace pads simultaneously. Common failures include pad imprinting from aggressive parking brake use, hub surface corrosion causing runout pulsation, and premature wear from seized guide pins—always clean the hub mounting face thoroughly before fitting replacement 40206-30P00 series rotors.
No OEM numbers yet. Add one.
Confirmed fitment
| Year | Make | Model | Engine | Confidence |
|---|---|---|---|---|
| 1991 | Nissan | 300ZX | 3L V6 Twin Turbo VG30DETT (300hp) | 80% |
Available parts

Seller: Marketplace seller
$59
Asking

Contribute
The wiki gets better with every install.
Sign in to contributePart numbers may show regional supersession (30P0A, 30P0B); always verify 280mm diameter and 30mm nominal thickness before installation
Seller: Marketplace seller
$69
Asking

Seller: Marketplace seller
$69
Asking