
Seller: Marketplace seller
$31
Asking
This usually takes 5-15 seconds. We're pulling together fitment data,
OEM numbers, and community knowledge...
Dusting off the service manual...
💡 This page improves over time as the community adds casting photos and confirms fitment
Rear Left Brake Flex Hose
This usually takes 5-15 seconds. We're pulling together fitment data,
OEM numbers, and community knowledge...
Dusting off the service manual...
💡 This page improves over time as the community adds casting photos and confirms fitment
Wiki page
5L V8 Naturally Aspirated E7TE (225hp).
Quick reference
Drum brake vs disc brake distinction is critical - verify rear axle type before purchase as hoses are not interchangeable between brake types
Left and right side hoses are not interchangeable due to bracket mounting angle and banjo fitting orientation
1993 SVT Cobra may utilize different banjo bolt diameter or caliper fitting - verify before installation
Context
The rear left brake flex hose on your 1987 Ford Mustang GT (E7TE 5.0L) serves as the critical flexible connection between the axle hardline and the rear disc brake caliper. Ford originally specified E7ZZ-2A442-A for this application, later superseded to F1ZZ-2A442-A in service catalogs. This hose is interchangeable across all 1987-1993 Fox Body Mustangs equipped with rear disc brakes, encompassing GT models and LX 5.0s featuring the Performance Rear Axle option. When junkyard hunting, prioritize 1990-1993 donor vehicles for fresher rubber compounds, but meticulously inspect for weather-cracked jackets, fluid seepage at the crimps, or bulging under residual pressure. Installation demands new copper crush washers at the banjo fitting and careful routing through the retaining bracket to prevent tire or suspension contact; note the stamped 'L' indicator confirming left-side orientation. Never attempt to substitute drum brake hoses (E5ZZ-2282-A series), as these feature incompatible length and end fittings. Always replace these hoses in axle pairs to ensure balanced hydraulic pressure and prevent brake pull.
No OEM numbers yet. Add one.
Confirmed fitment
| Year | Make | Model | Engine | Confidence |
|---|---|---|---|---|
| 1987 | Ford | Mustang | 5L V8 Naturally Aspirated E7TE (225hp) | 80% |
Available parts

Seller: Marketplace seller
$31
Asking

Contribute
The wiki gets better with every install.
Sign in to contributePart numbers assume USDM specification - export market vehicles may utilize different hose lengths or fittings
Rubber degradation occurs from inside out - external inspection may not reveal internal collapse causing brake drag
Seller: Marketplace seller
$31
Asking